The micrometer dispensing valve is a high-precision dispensing valve. The micro-value can reach 0.01mm, and the precision is very high. The control of low-viscosity glue water control is accurate, especially on some products with high-precision requirements. It is very obvious that the control quantity is accurate. Each point control is stable and the quality is guaranteed.

<  

Spot Valve Parameters

Operating Viscosity: 1~100,000 CPS

 

Vomiting volume: 0.01g

 

Operating pressure: 4-7kg/cm3

 

Feed pressure: <10kg

 

Operating frequency: <600min

 

Feed spout size: 1/8"npt(f)

Rubber outlet bore: 2.5mm

 

Flow regulation: Yes (kilometers)

 

Point Valve: Top Pin Point Valve

 

Shape size: (D) 21x (H) 164 (mm)

 

Weight: 226g

 

Control solenoid: 2-way 5-way/2-way 3-way available

 

Installation screw: M4 screw hole spacing 13mm

 

Advantages and features

 

1. Accurate dispensing precision control and stable dispensing control.

 

2. The micrometer is precisely controlled and the adjustment range is precise.

 

3. Ruhr connector, easy to install needle, does not affect glue dispensing position, does not need to point again.

 

4. It meets the requirements of low viscosity and high precision product dispensing.

 

5. Top pin structure with strong sealing and clean gel breakage.

 

Suitable glue

 

Ink, lubricating oil, water-based glue, UV glue, fluidity glue, no particles inside, can be controlled