Hot melt glue screw valve is a kind of glue dispensing valve that can be heated. In view of the high-precision dispensing demand that ordinary dispensing valve can not complete, this hot-melt glue screw valve can solve the requirements of glue heating and high-precision dispensing, and truly realize the micro dispensing function. Some solid glue can use hot-melt glue screw valve, while some glue needs heating, it can also be used! Similar to red glue, solder paste, etc.

 

　　1. The temperature can be controlled in the range of 0 ~ 200 ° and the suitable temperature can be constant.

　　2. Dispensing rate: can be controlled at 60 times per minute.

　　3. The glue output is controlled by precision motor and can be controlled at 0.2ul.

　　4. Dispensing width: minimum line width 0.19mm, minimum dispensing diameter 0.2mm

　　5. Repeat rate of glue output: 98%　

　　6. All rubber valve body material is tungsten steel.

　　7. The glue output is stable.

 

　　Model: zz-1050r

　　Motor speed: 0 ~ 300rpm (adjustable)

　　Motor power: 11W

　　Screw material: tungsten steel

　　Pump body material: aluminum alloy / stainless steel

　　Feed connection: Ruhr

　　Glue outlet: Custom needle or standard needle

　　Heating module: 0 ~ 200 degrees

　　Pressure body: 2bar

　　The minimum glue content: 160mg / S / td > 0

　　Applicable fluid: 3000 ~ 1300000cps